Made by a Fabricista: My Olive Green Tamarack

Made by a Fabricista: My Olive Green Tamarack

Hello everyone! I hope you all are having a great week!

I am here to share my latest make, a Tamarack Jacket from Grainline Studio.

This pattern has been out for a while. I am so late to the party, but better late than never, right? I am super happy how my Tamarack turned out!

Are you ready? Let's go!

Fabric

Making an olive color jacket was one of the items on my wish list for a while. Unfortunately the quilted jacketing I used has sold out. When I saw this plaid flannel, I thought it would be pretty if I placed the red on the cuffs. I wanted the red to peek out when I fold over the cuffs.



Pattern Alterations

I used size 6, shortened 2" for the bodice, and shortened 1" from the sleeve. If I make it again, I would add 1" back to the sleeve. (I am 5'1")

That way, I can fold over cuffs, but I don't lose the length of the sleeves.

Also, I would probably go with one size bigger to wear with more layers of clothes underneath.


When I made the sample jacket, I didn't like that the pocket placement.

I felt that my hands were in awkward positions. I wasn't comfortable putting my hands in. It was probably caused by shortening an inch of the jacket raised the placement of the pockets.


I wanted my hands to be able to slide in from the side instead of from top to bottom for this jacket.

Also, I wanted the pocket lining not to be inside the jacket for this project because I wanted to showcase the plaid.

So, I did some research for pocket options. There are so many Tamarac jackets made by creative makers all over the internet. I could spend hours looking at them!! LOL

I was almost going to go with patch pockets after I saw Helen's (Helen's closet) Tamarack.

Then I saw someone used the pocket of Jasse from Seamwork! I said, "Yeees!! This is the ones that I need! "I really liked the kangaroo style for my jacket.


Issues That I Ran Into

I was able to fix them, but I had two minor issues that I want to share.


Issue #1

As you can see in the picture, I used some horizontal lines on the plaid for quilting. Since the flannel was lightweight and shifty, I was a bit skeptical about how the stripes match when I sew seams together.

Lucky, all the seams matched beautifully except the left front. The side seam of the left front matched with the back, but the right and left front did not match. It was crucial to be fixed because it's the front! I was grateful that I had extra fabric to make the piece again.


I used safety pins and adhesive spray for the fabric to make quilting pieces. Now that I look back on it, I think it would have helped if I starched the flannel before cutting it. Note to myself, for a future project! LOL


Issue #2

When I was sewing bias tape around the neckline, I noticed that the bias tape seam was close to the right front corner. I thought there was enough distance not to affect making miter corner, but I was wrong! It was right on it! It was bulky and so ugly!

So, I solved it by moving bias seams, removing a few inches of seams on the jacket, and then cut off the problem bias seams and sewing bias tape back together on bias. Don't we all love the light bulb going off in our heads and finding the solution?

If I had not made some quilts last year. I could not fit it the way I did. I would have had to undo the rest of the seams. I am so glad I knew how to close the binding.


Well, this is my last post for Fabricsista. I am SO SO SO grateful for this opportunity. Thank you all so much for reading my blog.

I discovered more makers and enjoyed reading their blogs.

This year, I started something new. Between blogs as Fabricsista, I have been working hard since Spring. It is sewing-related. (of course!)

I probably need a bit more to share, but I can't wait to share it with my sewing friends!

till then,

Happy Sewing!

MEG | @meggisews


Unfortunately Fabric Mart Fabrics sell out quickly!
You can find similar fabrics by shopping the following category: JACKETING & FLANNEL.
You can also shop our selection of Grainline Studio patterns HERE.

  |  

More Posts

7 comments

  • Author image
    Pat Gottshalk: October 22, 2021

    I love how the jacket looks straight forward but the details keep inviting you in. Wonderful sewing and I appreciate the great pics that have been shared.

  • Author image
    lp: October 22, 2021

    Your jacket looks great! You did an excellent job!

  • Author image
    JD: October 22, 2021

    Love your jacket. That is a great color. So happy you enjoyed your time as a Fabricsista.

  • Author image
    Chriscor: October 22, 2021

    Great inspiration!

  • Author image
    Angie: October 25, 2021

    Great Job on your jacket.

  • Author image
    Unknown: October 25, 2021

    First of, simply beautiful jacket! So professional looking! Solutions for how to avoid your issues:

    1) Quilt before you cut. Take one piece of fabric which will be large enough for all the quilted details plus some extra space just in case. Quilt. Then place the pattern pieces on the right side and ensure that all the lines meet where they absolutely must, same as you would do with a plaid or horizontal stripe fabric. This way is also faster, because you don't have to stop and break the stitch lines.

    Alternatively: make bigger seam allowances, like 1 inch or even more, to give yourself some wiggle room after quilting. You can always cut the extra fabric away afterwards.

    2) Baste the detail that absolutely must look right (or at least pin baste). Place the seam of the bias tape at an inconspicuous place closest to your most visible points. E.g., for top front corners the best place to pit the seam of the bias tape is neckline center back. Baste the trim all the way to make sure that everything looks as it is supposed to. Then stitch. I know basting takes extra time, but if you wanted it fast you'd probably just go and buy it, right? If you choose to do it with your own hands, then I figure that's because you love doing it, so why don't spend as much time as it takes on something you love :)

    Alternatively: don't baste but stitch it in 2 steps. Start with the neckline center back where you place the seam of the bias tape and go all the way to one of the side seams on the hem, stop. Then do the same in another direction, from neckline center back to the hem side seam. I find it that on the hem a side seam is a more inconspicuous place than the center back so make the trim ends meet there.

    Happy stitching!
    Natalia

  • Author image
    smgs4life2: November 12, 2021

    Absolutely love this ❤️🧵🪡

Leave a comment

All blog comments are checked prior to publishing