Made By a Fabricista: Birthday Behavior

Made By a Fabricista: Birthday Behavior

As a young adult, I never worked on my birthday (even though I was a mom already!). And I did (and still do!) consider it "my own personal holiday" :)

Since learning to sew, and now that I do work on my birthday, I make myself a new dress for the day! The last couple of years, my bday falls on a weekday; so my birthday dress has to be work appropriate. Last year I made a knit shirtdress (still a closet favorite!) and this year, the moment I laid eyes on this button front sheath in the June Burda I knew this was it!


Doesn't she look so happy in her dress?! It could totally be her birthday!

I knew I needed something with some body but not too heavy since my birthday IS in July after all. I went straight to a couple of my favorite groups on Fabric Mart - cotton sateen and cotton twill and found this.

I LOVE this print! It works well as 'work-appropriate' animal print - light colored, small scale, neutral - it's cotton with a touch of Lycra, and is completely opaque - Win!




The description says it's semi-stiff which it is. The hand is similar to a lightweight denim or a heavy chambray (note: denim is a twill weave...chambray is a plain weave). I'm not normally a huge fan of A-line shapes but on this dress, it just works. I felt the stiffer fabric would work well with the dress silhouette.

It washed up well and takes a hot iron like a champ. It did get more wrinkled during construction than I expected but is easy to press.

There are a lot of pieces to trace. But oh-so-worth it.

Love nice, clean interiors!

I made my standard Burda adjustments:
- Traced a 40 neckline with 42 for the rest
- 5/8" swayback adjustment
- Removed 3/8" from center back tapering to nothing at the waist
- Removed some of the curvature from the side seams. Basically connected a straight line from above the curve to below. I'm not actually sure it was at the hip, as it seems a bit low...but it stuck out in the way that skirts and dresses with hip curvature because I don't have what I call "sticky-outy" hips.



I also did a 3/4" full seat adjustment on the back skirt and sewed the center back seam at 3/8" instead of the 5/8" seam allowance I added. Some time ago, I realized I got a much better fit on skirts if I traced a 16(42) front and 18(44) back. Because this pattern only goes up to size 42, I improvised.

I don't need to lower the bust point or do an FBA with Burda patterns <3

I really love the overall fit of this dress and want another in a solid color!!!


Now, do you sew Burda? Do you ignore their instructions? If you don't sew Burda do you often read about sewers lamenting the instructions? Do you plan to make this dress?

Follow the instructions!

Or at the least, remember that the button bands go on at the end especially if you're attaching the belt! DO NOT ask me how I know! :)

Okay fine! I skipped ahead and had to do a bunch of unpicking AND reaching out for help (Thanks Beth!). I ended up having to pull a Tim Gunn but it does in fact WORK!



The chalk line is the button band seam line


Then I sewed the top of the button band. I had to turn it and decide where to clip, etc but it works


I am quickly becoming a fan of these all-in-one clean finish facings. Such a lovely finish.



Burda didn't call for the facings to be interfaced - I did it anyway. And, because it can be hard to understitch this assembly, I trimmed my facings down 3/16" at the armhole to encourage the seam to roll to the inside. It generally works very well and especially so with lining fabrics. I ended up going back and understitching at the underarm seam and for about 2" on either side of it. It was bulky and I didn't want it flipping up/out.

Other notes:
I used 2-inch slides (I accidentally ordered slides with a center bar. I was disappointed but they work just fine!) and 5/8" buttons. The pattern appears to use larger buttons, but Burda does not specify. I had buttons that were almost the same bronze as the slides but only had 9 of them and I like to space buttons this size or smaller no more than 3" apart.

They don't match but they go :)


I used my walking foot for the entire dress except for the princess seams. I sewed those first to allow the convex side front piece to feed on bottom; helping the easing along.

I decided not to topstitch the seams after doing the belt. It doesn't stand out. Perhaps if I would have doubled the thread or did a triple stitch...(though, I plan to use this pattern again in a solid and WILL topstitch!)

It was a lot of work but I absolutely love it!


I have to point out:
1) That's not actual bust gape. That is me being SO focused on having a button at the waist level because of the belt that I started there and then spaced out my buttons. For many of us full-busted ladies, we start with the button at the bust line and space out. Because we need to really lock-and-load! I'll sew in a hidden snap there.

2) That's not actual neckline gaping. It fit fine. But I have a penchant for trying things on again and again and again...and I rarely staystitch so my neckline stretched out just a little.


I am so excited to wear my new address for my Birthday!

Nakisha

  |  

More Posts

18 comments

  • Author image
    Masha: June 26, 2016

    It's SO good! So glad I ordered some of this :)

  • Author image
    Angelle: June 26, 2016

    Lovely! It's very classy and classic. :D I like that you gave the details of the fabric properties.

  • Author image
    Sassafras: June 26, 2016

    Super ka-yute! Love your inside finishing. That dress is lovely on you.

  • Author image
    Carolyn (Diary of a Sewing Fanatic): June 26, 2016

    It's beautiful! You did a great job!

  • Author image
    badmomgoodmom: June 26, 2016

    Burda instructions confuse me. And I'm not a fan of tracing. But, they have such cute designs, I sometimes brave them anyway.

    Your dress is so cute!

  • Author image
    BeccaA: June 26, 2016

    I love your dress—perfect for a July birthday. Happy Birthday!

  • Author image
    The Sewing CPA: June 26, 2016

    OMG! Your dress looks amazing! You chose the perfect fabric for it and it suits you so well. Happy Birthday!

  • Author image
    Vanessa: June 26, 2016

    Beautiful work!! Happy Birthday to YOU! Mine is June 29th!

  • Author image
    Lisa: June 26, 2016

    What a great pairing of pattern and fabric. Enjoy wearing it on your birthday, and I hope your day is as fabulous as your dress!

  • Author image
    KS_Sews (Dressmakingbacles): June 26, 2016

    Cancer! <3 Happy early birthday!

  • Author image
    KS_Sews (Dressmakingbacles): June 26, 2016

    Thank you so much everyone!!

  • Author image
    Faye Lewis: June 27, 2016

    Cute dress and a wonderful fit!

  • Author image
    Ann Brodsky: June 26, 2016

    What a wonderful dress- I love every detail! Hope you have a fantastic birthday!

  • Author image
    Anonymous: June 27, 2016

    It's a lovely dress that fits you to a T! Congratulations and early wishes for a happy birthday!

  • Author image
    Unknown: June 27, 2016

    well Happy Birthday!!! and now I want to make one!

  • Author image
    adelafg: June 28, 2016

    Por favor , cual es numero del patrón

  • Author image
    Fabric Mart: June 28, 2016

    It is from Burda Patterns June Magazine, Burda 06-2016-105

    http://www.burdastyle.co.uk/

  • Author image
    That Black Chic: July 02, 2016

    you're like me always trying to move faster that the instructions and end up looking for my seam ripper! Patience is a virtue! This is a super nice birthday dress.

Leave a comment

All blog comments are checked prior to publishing